• Compare Products

Chalk Marker Holders for Acrylic Boards

From $13.00
main product photo

Keep your chalk markers together and close to your board at home with Chalk Marker Holders for Acrylic Boards. Pick the size that suits your setup, with 2 Marker Holder, 6 Marker Holder, and 8 Marker Holder options for everything from a compact setup to a larger colour collection.

Every holder is 3D printed in PLA plastic, a plant-based bioplastic made from renewable resources, and comes with a choice of Magnetic or Removable foam tape. Choose the holder size first, then select the attachment method and check the dimensions in Features and Sizing. Markers are sold separately. If you need both, choose a marker-and-holder Set with a matching pack and holder.

Features and Sizing

  • Holder sizes: 2 Marker Holder, 6 Marker Holder, and 8 Marker Holder.
  • Attachment options: Magnetic or Removable foam tape.
  • Material: 3D printed in PLA plastic, a plant-based bioplastic made from renewable resources.
  • 2 Marker: 39.7 W × 23.4 D × 45.5 H mm.
  • 6 Marker: 112.9 W × 23.4 D × 45.5 H mm.
  • 8 Marker: 149.5 W × 23.4 D × 45.5 H mm.

Explore the Range

Instructions

  1. Place the holder on a clean, dry, suitable magnetic surface.
  2. Check that the holder is secure before adding chalk markers.
  3. Choose a clean, dry, flat surface that is free from dust; do not apply to delicate, poorly prepared or freshly painted surfaces, and allow freshly painted surfaces to dry for at least 3 weeks.
  4. Peel the liner from one side of the supplied foam tape, apply the tape to the marked area on the back of the holder and press firmly.
  5. Remove the remaining liner, position the holder carefully and press firmly over the taped area for 5 seconds.
  6. To remove, empty the holder, ease the lower edge away from the surface and peel upwards very slowly; do not pull it straight off.

Choose from 2 Marker Holder, 6 Marker Holder, and 8 Marker Holder.

2 Marker: 39.7 W × 23.4 D × 45.5 H mm, 6 Marker: 112.9 W × 23.4 D × 45.5 H mm, and 8 Marker: 149.5 W × 23.4 D × 45.5 H mm.

They are 3D printed in PLA plastic, a plant-based bioplastic made from renewable resources.

Choose the holder size that matches the number of markers you want to keep together: 2, 6 or 8.

Choose Magnetic or Removable foam tape. Select the attachment option before adding the holder to your cart.

No. Markers are sold separately. Choose a marker-and-holder Set if you want both together.

Yes. It keeps selected chalk markers together beside a Tinyme acrylic board.

Recently Viewed
Previous Next